Pellet production line LDG-3000 (DUO) PRO
- Home
- New Machinery
- Farming Equipment
- Other equipment
- Pellet Production Lines
- Pellet production line LDG-3000 (DUO) PRO
| Make: | TechnoMaszBud |
| Model: | LDG-3000 (DUO) PRO |
| Power: | 67 kW |
LDG-3000 DUO Pellet Production Line PRO is an advanced solution designed for the production of high-quality feed pellets. With the use of two PRIME-300 PRO pellet mills, the line achieves a capacity of up to 1000 kg/h for wood pellets and up to 1400 kg/h for feed pellets. Each pellet mill is equipped with a 30 kW motor, a 300 mm diameter die, and 178 mm diameter rotating rollers, ensuring efficient processing of various raw materials. Additionally, the line is equipped with a humidification system, calibrator-cooler, and a closed extraction system, guaranteeing high quality of the final product.
One of the key advantages of the LDG-3000 DUO PRO line is its ability to operate continuously even during service or unforeseen failures. Thanks to the use of two PRIME-300 PRO pellet mills, the line can continue production when one of the mills is shut down for maintenance or repair. This solution ensures the continuity of the technological process, minimizes downtime, and significantly increases production efficiency and reliability, guaranteeing uninterrupted operation of the entire system.
The LDG-3000 DUO PRO granulation line consists of:
1. Screw feeder PS-200 DUO PRO:
The feeder is designed for collecting raw material and evenly supplying biomass to the pellet mill. This unit has smooth adjustment of feed rate by frequency converter. Total power consumption – 3 kW. Hopper capacity – 2 m³ (two cubic meters).
2. Humidification system:
Used to ensure adequate moisture content of the raw material. The system consists of the following elements: valve, pump, 100-liter water tank, and nozzle. Humidification is done with the required, precisely measured amount of water during granulation by connecting the system to the stand above the working part. Power consumption 0.37 kW.
3. Reliable PRIME-300 PRO pellet mills:
Two universal PRIME-300 granulators process various types of material, achieving an actual capacity of up to 1000 kg/h for sawdust pellets and up to 1400 kg/h for feed pellets.
4. Calibrator – cooler for granules/pellets KC-300:
Hot pellets discharged from the granulator fall onto the calibration sieve of the drum. As the drum rotates, the pellet spreads in a thin layer on the surface. At the same time, an airstream generated by a fan passes through the cooling chambers. It cools the pellets, reducing their moisture via the top side port, while small gravel and dust are routed through two lower ports, via the cyclone, to bags.
5. Closed extraction system SO-4:
The closed extraction system collects excess dust and raw materials from the cooling and pellet sorting system and collects them in bags, while also filtering the air of dust via two upper filter bags. The heart of the system is a high-performance fan that creates the necessary negative pressure in the circuit, allowing effective extraction of small particles and dust.
6. Control cabinet (control panel):
The control cabinet houses electric remote and automatic control devices for the complex’s mechanisms and electric drives, installed in the control cabinet. The compact dimensions and built-in automation cooling system make the control panel reliable and convenient for installation near the production line.
7. 30 kW frequency inverters (2 pcs):
The frequency inverters provide soft start, speed adjustment, overload protection, and energy savings, thus increasing the safety, durability, and efficiency of the machine's operation.
Cables for connecting the line are not included!